Workover rigs and rig spares — China Sourcing Guide

Prepare a China sourcing enquiry for workover rigs, rig assemblies and replacement spares. Start with the rig identification and the component drawing so that a supplier can distinguish a complete equipment package from a single replacement item.

Define the sourcing scope

A workover enquiry may include the rig, winch or drawworks components, hydraulic cylinders, couplings, brake parts, packing and service kits. Keep each assembly and its subcomponents on separate RFQ lines. Record the installed configuration rather than relying on a general rig series name.

What to include in your RFQ

  • Rig manufacturer, model, serial number and year where known
  • Assembly drawing, part number and revision; photographs of the installed component
  • For a complete rig: duty, operating conditions, mobility and destination requirements
  • Quantity, required documents, inspection scope and delivery deadline

What to verify before accepting an offer

The same rig series can have different installed assemblies. A reference such as XJ900 or ZJ40 is a starting point, not approval that every spare bearing that reference will fit. For brake, lifting and well-control components, require technical acceptance of the specific proposed part.

Ask the supplier to state the proposed manufacturer, country of origin, supply condition and any technical exceptions. Agree the available documentation, inspection scope, packing and quoted delivery terms before placing the order. Record open points against each RFQ line instead of treating a partial match as an accepted replacement.

Product and model reference directory

The references below were reviewed from RIGE⁠Q’s catalogue on 22 October 2026. They include equipment, related spares and associated components as classified in that source. These are identification references for an enquiry; availability, manufacturing origin, brand authorization, specifications and compatibility must be confirmed for the specific offer. Published reference descriptions do not establish stock or certification.

Product / model / part reference Reference source
QFH-221 Air Filter Regulator RIGE⁠Q reference
1003275-02 Packing Unit 29 ½” X 500 PSI RIGE⁠Q reference
1002681 Seal Kit 29 ½” X 500 PSI RIGE⁠Q reference
11" 3M SHAFFER LWS TYPE 70 RAM PACKER BLIND-136801 RIGE⁠Q reference
11" 3M SHAFFER LWS TYPE 70 RAM PACKER 5-1/2"-136755 RIGE⁠Q reference
PACKER-FH2821NL-05-00 RIGE⁠Q reference
21867-А0-30 Impeller RIGE⁠Q reference
20614-01-30 Hydraulic Cup RIGE⁠Q reference
20937-01-ЗOA Pump Body RIGE⁠Q reference
XJ1600(XJ120) RIGE⁠Q reference
XJ1800(XJ150) RIGE⁠Q reference
XJ2250(XJ180) RIGE⁠Q reference
XJ1350(XJ100) RIGE⁠Q reference
XJ700(XJ40) RIGE⁠Q reference
XJ900(XJ60) RIGE⁠Q reference
HXJ90 RIGE⁠Q reference
HXJ112 RIGE⁠Q reference
XJ1100(XJ80) RIGE⁠Q reference
FREE-STANDING WORKOVER RIG WITHOUT GUYLINE ANCHOR RIGE⁠Q reference
XJ600(XJ30) RIGE⁠Q reference
W27-20-902 Balloon RIGE⁠Q reference
E301.2.3.34 Composite brake block RIGE⁠Q reference
SL135-32-02 Oil taps RIGE⁠Q reference
SL135-06 Packing RIGE⁠Q reference
Y15160-00 Tongs RIGE⁠Q reference
Auxiliary brake system 224WCB2 RIGE⁠Q reference
YOXVIIZ500 Hydraulic coupling RIGE⁠Q reference
YOXNZ450 Hydraulic coupling RIGE⁠Q reference
W24-07-900 Friction plate RIGE⁠Q reference
W00-30-902 SPRING COIL RIGE⁠Q reference
WEX2020007 NUT RIGE⁠Q reference
W18-09-000 shim RIGE⁠Q reference
ZJ-20 drilling rig cylinder Y15160 RIGE⁠Q reference
Separation spring 24" A7208X RIGE⁠Q reference
JZG34A dead rope holder RIGE⁠Q reference
ZJ40 Truck-mounted Drilling Rig RIGE⁠Q reference
Pneumatic Clutch (RPD) LT 500/250 RIGE⁠Q reference
XJ750 Drilling&Workover Rig RIGE⁠Q reference
JZG41 dead rope holder RIGE⁠Q reference
4900450095 Cylinder working piece DF35-RAO499-G02-10 RIGE⁠Q reference
XJ450 Drilling&Workover Rig RIGE⁠Q reference
XJ350 Drilling & Workover Rig RIGE⁠Q reference
5001000153 Middle bridge SJ Petro RIGE⁠Q reference
5001000151 Secondary bridge SJ Petro RIGE⁠Q reference
4500300013 DOUBLE ROW TAPPERED ROLLBER BEARING RIGE⁠Q reference
103.07.01 Bail RIGE⁠Q reference
Well Repair Device Under Press RIGE⁠Q reference
Electric Drive Rig RIGE⁠Q reference
5001000081 Reducer assembly SJ Petro RIGE⁠Q reference
DCYG sucker rod elevator RIGE⁠Q reference
CDQ sucker rod elevator RIGE⁠Q reference
ZLD122475F Beam for ZJ-30 RIGE⁠Q reference
BK-5-6D lever RIGE⁠Q reference
P2400048aa drive shaft RIGE⁠Q reference
A35-AA4-MB53-MA53-XDR53-Z16 Commercial triple valve RIGE⁠Q reference
BHJ200C400 drive shaft RIGE⁠Q reference
BJX260-00 corner box RIGE⁠Q reference
121121301 Hexagon screw RIGE⁠Q reference
P-055161-00000 R431003664 AVENTICS/REXROTH RIGE⁠Q reference
540G250 pulley of hook of unit RIGE⁠Q reference
Repair kit for the winch auxiliary brake piston RIGE⁠Q reference
JC21D 11 (JC21A-03-01-00)Winch brake belt RIGE⁠Q reference
QY494 XJ-L15 Valve arrester of the winch ZJ 2 RIGE⁠Q reference
ZJ 20 Swivel cooling winch bandagess RIGE⁠Q reference
8100949 Pin of connection of the handle and boom RIGE⁠Q reference
8100947 Handle pin RIGE⁠Q reference
8100948 Boom cylinder rod connection pins RIGE⁠Q reference
4642666 Pin washer RIGE⁠Q reference
4638803 Bushing of a pin of connection of the handle and boom RIGE⁠Q reference
4642667 Handle pin washer RIGE⁠Q reference
А590106 Handle and bucket pin washer RIGE⁠Q reference
4657153 Washer of hydraulic cylinder connection RIGE⁠Q reference
4668645 Upper windshield RIGE⁠Q reference
4667917 gasket RIGE⁠Q reference
4900350091 PD4-41-0098 Workover rig accessories RIGE⁠Q reference
7049112042, Parker P25 gear Workover rig accessories RIGE⁠Q reference
3801950001,VSP-3301-31 Workover rig accessories RIGE⁠Q reference
4900350089,2-BA-1 Workover rig accessories RIGE⁠Q reference
SE-1/2-B Valve RIGE⁠Q reference
72.120.00 for Offtake SWIVEL SL-135 RIGE⁠Q reference
18CB500 pneumatic tire clutch RIGE⁠Q reference
LT1070/200T pneumatic tire clutch RIGE⁠Q reference
40T0705444444 Cylinder repair kit (hydraulic cathead) RIGE⁠Q reference
40B0605JG050304 brake pad RIGE⁠Q reference
40TZJ30JG4444 hydraulic 5 ton winch repair kit RIGE⁠Q reference
40T0703666666 Telescopic cylinder repair kit RIGE⁠Q reference
KPJ-L, D:32 Valve RIGE⁠Q reference
40T0604JGT0478 spring, main roller RIGE⁠Q reference
40T0707GJ1111 repair kit, manual clamp hydraulic lifting cylinder RIGE⁠Q reference
Bolt, part number 40B0605JG0503A RIGE⁠Q reference
40T0702YL3333333 Repair kit, lifting cylinder RIGE⁠Q reference
40T0604JGT0479 friction plate RIGE⁠Q reference
40T0604JGE5555 repair kit, main drum RIGE⁠Q reference
23Q-L15K Pneumatic control valve RIGE⁠Q reference
40T0704GJ9999 Repair kit, supporting cylinder RIGE⁠Q reference
40T0501444444 Repair kit, PTO power output box RIGE⁠Q reference
40T0801QL0111 Quick release valve RIGE⁠Q reference
P1100326AA Ring press RIGE⁠Q reference
P1100657AA Support ring RIGE⁠Q reference
P1100298AA Stop ring RIGE⁠Q reference
P1100296AA Bronze bushing RIGE⁠Q reference
P1100322AA Ring press RIGE⁠Q reference
P1300165AA Threaded bushing RIGE⁠Q reference
P1100300AA Dust circle RIGE⁠Q reference
EVF565 RIGE⁠Q reference
Workover Rig RIGE⁠Q reference
HXJ135 RIGE⁠Q reference
HXJ180 RIGE⁠Q reference
HXJ225 RIGE⁠Q reference

Request China sourcing support

Send the complete reference, quantity, destination and required date through the contact form. List the drawings and nameplate photographs you hold; the form carries text only, and we will say where to send the files. If you have a preferred manufacturer or require manufacture in China, state this explicitly so that the sourcing review can follow that requirement.

Continue with Oilfield equipment sourcing, the RFQ checklist and the knowledge base.