A useful mud-pump enquiry starts with the manufacturer, complete pump model and the component required. Names such as GD, Gardner Denver, National, Emsco or F-1600 help narrow the search, but a shared family name does not establish parts interchangeability. This guide helps Chinese domestic buyers and overseas procurement teams identify the information needed for a sourcing review.
Common mud-pump model families
The references below identify equipment families found in manufacturer or replacement-component documentation. Hyphenated and compact model spellings are included to help with searches. Legacy references are not statements of current complete-pump production. Reference sources were reviewed on 23 October 2026.
| Product / model reference | Reference source |
|---|---|
| Gardner Denver / GD legacy PZ family — PZ-7 / PZ7 | Manufacturer / component reference |
| Gardner Denver / GD legacy PZ family — PZ-8 / PZ8 | Manufacturer / component reference |
| Gardner Denver / GD legacy PZ family — PZ-9 / PZ9 | Manufacturer / component reference |
| Gardner Denver / GD legacy PZ family — PZ-10 / PZ10 | Manufacturer / component reference |
| Gardner Denver / GD legacy PZ family — PZ-11 / PZ11 | Manufacturer / component reference |
| GD Energy Products — PZ 1000 / PZ1000 | Manufacturer / component reference |
| GD Energy Products — PZ 1600 / PZ1600 | Manufacturer / component reference |
| GD Energy Products — PZ 2000 / PZ2000 | Manufacturer / component reference |
| GD Energy Products — PZ 2400 / PZ2400 | Manufacturer / component reference |
| NOV / National — 12-P-160 / 12P160 | Manufacturer / component reference |
| NOV / National — 14-P-220 / 14P220 | Manufacturer / component reference |
| NOV / Continental Emsco — FB-1600 / FB1600 | Manufacturer / component reference |
| NOV / Continental Emsco — FC-1600 / FC1600 | Manufacturer / component reference |
| Oilwell — A-1700-PT / A1700PT | Manufacturer / component reference |
| Oilwell — HD-1700-PT / HD1700PT | Manufacturer / component reference |
| F-series (identify the manufacturer) — F-500 / F500 | Manufacturer / component reference |
| F-series (identify the manufacturer) — F-800 / F800 | Manufacturer / component reference |
| F-series (identify the manufacturer) — F-1000 / F1000 | Manufacturer / component reference |
| F-series (identify the manufacturer) — F-1300 / F1300 | Manufacturer / component reference |
| F-series (identify the manufacturer) — F-1600 / F1600 | Manufacturer / component reference |
Gardner Denver, GD and PZ: make the reference precise
Gardner Denver High Pressure Solutions was renamed GD Energy Products. Buyers may therefore use the older brand name, the abbreviation GD, or a PZ model when looking for a replacement. Preserve the exact nameplate and manual references in the RFQ rather than converting one model name into another.
The current GD mud-pump range lists PZ 1000, PZ 1600, PZ 2000 and PZ 2400. Legacy PZ-7, PZ-8, PZ-9, PZ-10 and PZ-11 references appear in the cited service or component sources. Do not assume that a legacy PZ number and a current power-based model designation describe the same configuration. Ask for a drawing-based or documented part cross-reference.
Source: GD Energy Products company announcement.
National, Emsco and Oilwell references
NOV documentation identifies National 12-P-160 and 14-P-220, Continental Emsco FB-1600, and Oilwell A-1700-PT / HD-1700-PT among relevant equipment frames. Its pump-system page also lists FB-1600 and FC-1600 documentation. Keep the equipment name and full suffix with the part number: a fluid-end, power-end or expendable requirement can depend on the installed configuration.
When an enquiry says only “National mud pump liner” or “Emsco pump parts,” add the complete model, liner bore, part reference and drawing. A pressure designation must relate to the installed pump configuration and the selected part, rather than being inferred from a family name.
F-series pumps: model and manufacturer are separate fields
F-500, F-800, F-1000, F-1300 and F-1600 are useful F-series reference names. The cited Chinese manufacturer’s catalogue lists these model designations. If your installed equipment is identified as BOMCO or another maker, provide that nameplate and the corresponding parts manual as well. The family designation alone does not demonstrate a common specification or interchangeable spares across manufacturers.
Typical enquiry descriptions include mud pump liners, pistons, valves and seats, fluid-end modules, piston rods, pony rods, seals, bearings and lubrication or spray-system parts. Separate each component on the RFQ and identify any assembly supplied with it.
What to send for a replacement-part enquiry
- Manufacturer, full pump model, serial number and a clear nameplate photograph.
- OEM or existing part number, manual page, drawing revision and quantity.
- For liners and pistons: bore size, dimensions, material requirement and operating conditions.
- For valves and seats: complete assembly reference, seating dimensions and requested material.
- For fluid-end or pressure-containing parts: interface drawing, required pressure duty, material records and agreed tests.
- For bearings and seals: full designation including suffixes, location and dimensions where available.
Buying within China or arranging export
For a domestic purchase, include the delivery city, receiving site, required invoice information and whether prices should be stated with applicable tax and domestic freight. For export, include the destination, requested delivery terms and documentation requirements. Clarify these commercial items before comparing offers.
Specify whether you require an original component, a proposed aftermarket replacement or manufacture to an accepted drawing. ORINOV reviews the sourcing requirement; manufacturer, origin, suitability, documents and availability are confirmed for the specific offer. A brand reference does not imply OEM authorization.
Continue your enquiry
Use the mud pumps and parts supply page, replacement-part review guide and RFQ checklist. Send the model and component references through the contact form with your quantity and delivery location.