Power tongs, slips and handling tools — China Sourcing Guide

Review reference names for power tongs, slips and tubular handling components, then build an RFQ around the tool’s exact duty and equipment configuration.

Review reference names for power tongs, slips and tubular handling components, then build an RFQ around the tool’s exact duty and equipment configuration.

Define the sourcing scope

Separate complete tools from dies, inserts, slip bodies, repair components and associated rig-floor spares. State whether your requirement concerns drill pipe, casing, tubing or another tubular. The buyer’s technical team should approve the proposed tool configuration and acceptance requirements.

What to include in your RFQ

  • Tool manufacturer, model, serial number and part reference
  • Tubular outside diameter, applicable connection and intended operation
  • Required load or torque duty, operating conditions and configuration
  • Required inspection, test records, traceability and destination acceptance criteria

What to verify before accepting an offer

An outside-diameter match alone does not demonstrate tool suitability. Confirm the complete configuration, duty and documentation. A replacement die or slip component needs its own drawing or verified manufacturer reference.

Ask the supplier to state the proposed manufacturer, country of origin, supply condition and any technical exceptions. Agree the available documentation, inspection scope, packing and quoted delivery terms before placing the order. Record open points against each RFQ line instead of treating a partial match as an accepted replacement.

Product and model reference directory

The references below were reviewed from RIGE⁠Q’s catalogue on 22 October 2026. They include equipment, related spares and associated components as classified in that source. These are identification references for an enquiry; availability, manufacturing origin, brand authorization, specifications and compatibility must be confirmed for the specific offer. Published reference descriptions do not establish stock or certification.

Product / model / part reference Reference source
SD Rotary Slips RIGE⁠Q reference
The CMS casing slips RIGE⁠Q reference
QW-375 QW Pneumatic Drill Pipe Slip RIGE⁠Q reference
The UC casing slips RIGE⁠Q reference
YQ16B.12.1-02C dental block RIGE⁠Q reference
DCS-L drill collar slip RIGE⁠Q reference
SD Slip bodies RIGE⁠Q reference
Type DCS Drill Collar Slip RIGE⁠Q reference
PS375 air slip RIGE⁠Q reference
SDML 4-1/2 " slip RIGE⁠Q reference
19.620.00 Brake strap RIGE⁠Q reference
19.100-19 5 ″ roller RIGE⁠Q reference
XYQ12.Z-48 Roller RIGE⁠Q reference
TQ340/35YA-17 Jaw 9 5/8" RIGE⁠Q reference
TQ340-58 Wedge Board RIGE⁠Q reference
ZQ203-098 Roller RIGE⁠Q reference
103318-001 Retaining ring RIGE⁠Q reference
TQ340/35Y.1.4.2-02 Roller RIGE⁠Q reference
ZQ127-25Y hydraulic wrench complete RIGE⁠Q reference
YZB-120 station RIGE⁠Q reference
103762-002 Jaw Set 9 5/8" RIGE⁠Q reference
56.320.06 , transmission small shaft RIGE⁠Q reference
Jaw brasket (3C1-98) RIGE⁠Q reference
HG-4-332-66 RIGE⁠Q reference
SDN-10-24-480C DIN Rail Power Supplies RIGE⁠Q reference

Request China sourcing support

Send the complete reference, quantity, destination and required date through the contact form. List the drawings and nameplate photographs you hold; the form carries text only, and we will say where to send the files. If you have a preferred manufacturer or require manufacture in China, state this explicitly so that the sourcing review can follow that requirement.

Continue with Oilfield equipment sourcing, the RFQ checklist and the knowledge base.